Integrator's Reference Manual for the VSX Series
3 - 74 www.polycom.com/videodocumentation
pricsu pricsu <internal|external|get>
Where:
• internal: Sets the internal CSU
mode. This is the default.
• external: Sets the external CSU
mode. When selected, you must
specify the PRI line buildout. (See
the prilinebuildout command on
page 3-75.)
• get: Returns the current CSU
setting (internal or external).
Sets or gets the PRI CSU mode
for a T1 interface. By default, the
T1 PRI network interface
module is set for internal CSU
mode.
User interface screen location:
System > Admin Settings >
Network > IDSN (page 2):
External CSU
Note: This screen is only acces-
sible if you have a PRI network
interface connected to your
system.
pricsu external
pridialchan-
nels
pridialchannels <set|get>
<{1..12|1..15}>
Where:
• set: Sets the number of PRI
channels to be dialed in parallel
when followed by a parameter from
<{1..12|1..15}>. To erase the current
setting, omit the parameter.
• get: Returns the current number of
channels dialed in parallel.
• {1..12|1..15}: Range of numbers of
PRI channels that can be dialed in
parallel. For PRI T1, the range is
1..12. For PRI E1, the range is 1..15.
Sets or gets the number of PRI
channels to dial in parallel. By
default, ISDN channels are
dialed three at a time. On PRI
systems, you can choose the
number of channels to dial in
parallel.
User interface screen location:
System > Admin Settings >
Network > IDSN (page 4):
Number of Active Channels
Note: This screen is only acces-
sible if you have a PRI network
interface connected to your
system.
pridialchannels
set 3
priintlprefix priintlprefix <set|get> ["prefix"]
Where:
• set: Sets the PRI international
dialing prefix when followed by the
parameter “prefix”. To erase the
current setting, omit the parameter.
•get: Returns the current setting.
•“prefix”: Numeric string.
Sets or gets the PRI interna-
tional dialing prefix. The
international prefix defaults to
011 for North America and 00
for European countries. The
default depends on the country.
User interface screen location:
System > Admin Settings >
Network > IDSN (page 3):
International Dialing Prefix
Note: This screen is only acces-
sible if you have a PRI network
interface connected to your
system.
priintlprefix set
011
Command Syntax Description Example
To Next Page
Loading...
Need help?
General
