Polycom VSX Series Integrator's Reference Manual

Chapter 3 - System Commands
© Polycom, Inc. 3 - 93
display-
params
(continued)
registerthissyste
m no
showaddrsingab
both
primarycallchoice
manual
secondarycallchoi
ce none
preferredalias
extension
gatewaynumbertype
number+extension
outboundcallroute
isdn
usegatekeeper off
numdigitsdid 7
numdigitsext 4
gatewaycountrycod
e <empty>
gatewayareacode
<empty>
gatewaynumber
<empty>
gatekeeperip
<empty>
h323name Jw
e164ext 59715
gatewayext 59715
usepathnavigator
required
................
enablesnmp enablesnmp <yes|no|get>
Where:
• yes: Enables the SNMP option.
•no: Disables the SNMP option.
• get: Returns the current setting (yes
or no).
Enables or disables SNMP. This
option is enabled by default.
User interface screen location:
System > Admin Settings >
Global Services > SNMP:
Enable SNMP
enablesnmp yes
gabpass-
word
gabpassword <set|get>
[“password”]
Where:
• set: Sets the GDS password to
“password”. To erase the current
setting, omit “password”.
•“password”: Password to access
the GDS server. Valid characters
are: a through z (lower and
uppercase), -, _, @, /, ;, ,, ., \, 0
through 9. Enclose the string in
quotation marks if it includes
spaces.
Sends the password to gain
access to the Global Directory
Server (GDS) server.
Note: This command cannot be
used unless an admin password
has been set.
User interface screen location:
System > Admin Settings >
Global Services > Directory
Servers: Password
gabpassword set
gabPass
Command Syntax Description Example

Polycom VSX Series Specifications

General

Video Standards	H.264, H.263++
Audio Standards	G.711, G.722, G.722.1, G.728
Network Protocols	H.323, SIP
Video Inputs	S-Video, Composite video
Video Outputs	Composite, S-Video, DVI, HDMI
Audio Inputs	Line In
Audio Outputs	Line Out
Data Collaboration	H.239
Network Interfaces	Ethernet
Power Consumption	Varies depending on the specific model and configuration.