Polycom VSX Series Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series
3 - 94 www.polycom.com/videodocumentation
gabserverip gabserverip <set|get> [“ipaddress”]
Where:
• set: Sets the GDS server’s IP
address when followed by the
parameter “ipaddress”. To erase the
current setting, omit “ipaddress”.
•get: Returns the current setting.
• “ipaddress”: IP address of the
GDS server. Can be a numeric or
character string.
Sets the IP address of the
Global Directory Server (GDS)
server.
User interface screen location:
System > Admin Settings >
Global Services > Directory
Servers: Global
Directory (GDS)
gabserverip set
gab.polycom.com
get screen get screen Returns the name of the current
screen so that the control panel
programmer knows which
screen the user interface is
currently displaying.
get screen
Output sample:
screen:
generatetone
gmscity gmscity <set|get>[“city”]
Where:
• set: Sets the GMS city name when
followed by the “city” parameter.
• Note: Enclose the string in
quotation marks if it includes
spaces. Example: “San Antonio”. To
erase the current setting, omit “city”.
•get: Returns the current setting.
• “city”: Character string specifying
the city.
Sets the Global Management
System (GMS) city information.
User interface screen location:
System > Admin Settings >
Global Services > My Informa-
tion: City
gmscity set Paris
gmscon-
tactemail
gmscontactemail <set|get>
[“email”]
Where:
• set: Sets the GMS contact E-mail
address when followed by the
“email” parameter. To erase the
current setting, omit “email”.
•get: Returns the current contact
E-mail address.
• “email”: Alphanumeric string
specifying the E-mail address.
Sets the GMS contact E-mail
information.
User interface screen location:
System > Admin Settings >
Global Services > My Informa-
tion: Contact Email
gmscontactemail
set
gms_manager@mycom
pany.com
gmscontact-
fax
gmscontactfax <set|get> [“fax”]
Where:
• set: Sets the GMS contact fax
information when followed by the
“fax” parameter. To erase the current
setting, omit “fax”.
•get: Returns the current contact fax
information.
• “fax”: Character string specifying
the fax number. Enclose the string in
quotation marks if it includes
spaces. Example: “512 555 1212”.
Sets the GMS contact fax
information
User interface screen location:
System > Admin Settings >
Global Services > My Informa-
tion: Contact Fax
gmscontactfax ”512
555 1212”
Command Syntax Description Example

Polycom VSX Series Specifications

General

Video Standards	H.264, H.263++
Audio Standards	G.711, G.722, G.722.1, G.728
Network Protocols	H.323, SIP
Video Inputs	S-Video, Composite video
Video Outputs	Composite, S-Video, DVI, HDMI
Audio Inputs	Line In
Audio Outputs	Line Out
Data Collaboration	H.239
Network Interfaces	Ethernet
Power Consumption	Varies depending on the specific model and configuration.