Polycom VSX Series Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series
3 - 18 www.polycom.com/videodocumentation
mute mute <register|unregister|near|far>
mute near <on|off|toggle|get>
mute far get
Where:
•register: Registers the system to
give notification when the mute mode
changes.
•unregister: Disables register mode.
•near: Sets the command for the near
site. Requires one of these
parameters: on, off, toggle, or get.
•far: Sets the command for the far
site. Requires the parameter get.
For mute <near|far> parameter:
•on: Turns on the mute mode for the
near site (mute near).
•off: Turns off the mute mode for the
near site (mute near).
•toggle: If in mute near mode,
switches to the other mode setting
(mute near off) and vice versa.
•get: Returns the current setting for
the near or far site (mute near|far
get).
Sets the near or far site mute
mode. Also sets the system to
register or unregister mode. In
register mode, the system sends
notification to the RS-232 ses-
sion when the far or near site is
muted or unmuted.
mute near on
muteau-
toanswer
muteautoanswer <yes|no|get>
Where:
•yes: Enables Mute Auto Answer
Calls mode. The microphone will be
muted when the VSX system
receives a call while in Auto Answer
mode.
•no: Disables Mute Auto Answer Calls
mode. The microphone will not be
muted when the VSX system
receives a call while in Auto Answer
mode.
•get: Returns the current setting (yes
or no).
Sets the VSX system to Mute
Auto Answer Calls mode. When
this option is selected, the
microphone pod is turned off to
prevent the far site from hearing
the near site when the VSX
system is in Auto Answer mode.
User interface screen location:
System > User Settings: Mute
Auto Answer Calls
muteautoanswer
yes
soundef-
fectsvolume
soundeffectsvolume <set|get|test>
soundeffectsvolume set <{0..10}>
Where:
• set: Sets the volume of sound
effects. Requires a volume
parameter in the range {0..10}.
•get: Returns the current setting.
• test: Tests the volume of sound
effects.
Allows you to adjust and test the
volume of the sounds made by
the VSX system when an object
on the screen is selected with
the remote control.
User interface screen location:
System > Admin Settings >
Audio: Sound Effects Volume
soundeffectsvolu
me set 6
Command Syntax Description Example

Polycom VSX Series Specifications

General

Video Standards	H.264, H.263++
Audio Standards	G.711, G.722, G.722.1, G.728
Network Protocols	H.323, SIP
Video Inputs	S-Video, Composite video
Video Outputs	Composite, S-Video, DVI, HDMI
Audio Inputs	Line In
Audio Outputs	Line Out
Data Collaboration	H.239
Network Interfaces	Ethernet
Power Consumption	Varies depending on the specific model and configuration.