Polycom VSX Series

Chapter 3 - System Commands
© Polycom, Inc. 3 - 33
numdigit-
sext
numdigitsext <{0..99}|get>
Where:
• {0..99}: The number of digits in the
gateway number if
gatewaynumbertype is set to
number+extension.
• get: Returns the current setting.
Sets the number of digits in the
Number+Extension Gateway
number (E.164 dialing). The
number of digits in that number
is that portion of the full Num-
ber+Extension number that the
Gateway will be given from the
ISDN service provider as the
Called Party Line Identifier.
This, in turn, will be passed to
the Gatekeeper for address
resolution.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
(page 4): Number of Digits in
Extension
numdigitsext 10
outbound-
callroute
outboundcallroute
<gateway|isdn|get>
Where:
•gateway: Use if your outbound call
needs to be handled by a gateway.
•isdn: Use if your VSX system is
connected to an ISDN line. ISDN is
the default.
•get: Returns the current setting
(gateway or isdn).
Sets the default outbound call-
ing route.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
(page 2): Outbound Call Route
outboundcallroute
gateway
phone phone <flash|clear>
Where:
•flash: Switches the phone channel
to the next channel to add another
telephone call to your video call.
• clear: Clears any dialstring from the
text box on the Telephone screen.
Either switches the phone chan-
nel to the next channel to add
another telephone call to a
video call, or clears any dial-
string from the text box on the
Telephone screen of the user
interface.
User interface screen location:
Telephone > Flash button and
Clear button
phone flash
Command Syntax Description Example