Polycom VSX Series

Integrator's Reference Manual for the VSX Series
3 - 34 www.polycom.com/videodocumentation
pip pip <on|off|auto|swap|get>
Where:
•on: Enables PIP mode. The
VSX system shows a PIP window
that remains in the lower right corner
of the screen until the video call is
completed.
•off: Disables PIP mode.
•auto: The VSX system shows a PIP
window when the call is first
connected and when the remote
control is not resting on a flat
surface.
•swap: Toggles the content of the
PIP and the main display between
the near-site and far-site view.
•get: Returns the current setting for
PIP mode (on, off, or auto).
Sets the on-screen PIP mode.
The PIP feature allows the near
site to adjust near-camera views
while in a video conference.
User interface screen location:
System > Admin Settings >
Monitors > Monitors: PIP
or
System > User Settings (page
2): PIP
Note: The Allow Access to User
Settings option under System >
Admin Settings > General Set-
tings > Security (page 2) must
be checked for the User Set-
tings option to be available.
pip auto
recentcalls recentcalls View the list of recent calls.
User interface screen location:
System > Admin Settings >
Network > Recent Calls
recentcalls might
return something like
this:
"Austin Oasis"
16/Jun/2004
14:39:56 Out
Sooners
16/Jun/2004
14:40:07 Out
A 16/Jun/2004
14:40:35 Out
4136419
16/Jun/2004
20:27:33 Out
4136419
16/Jun/2004
20:28:37 Out
"POLYCOM MGC"
17/Jun/2004
02:13:23 In
209.163.168.122
17/Jun/2004
02:20:08 In
"POLYCOM MGC"
17/Jun/2004
02:21:40 In
"POLYCOM MGC"
17/Jun/2004
05:53:04 In
"POLYCOM MGC"
17/Jun/2004
07:00:19 In
Command Syntax Description Example