Polycom VSX Series Integrator's Reference Manual

Integrator's Reference Manual for the VSX Series
3 - 38 www.polycom.com/videodocumentation
vcbutton vcbutton
<play|stop|get|register|unregister
>
Where:
•play: Starts sending the video
stream from the Visual Concert™
VSX.
•stop: Stops sending the video
stream from the Visual Concert
VSX.
• get: Returns the current
mode/setting (play or stop).
•register: Registers the shell session
to receive notifications about Visual
Concert VSX events.
•unregister: Unregisters the shell
session to receive notifications
about Visual Concert VSX events.
Simulates the Visual Concert
VSX play and stop buttons. It
can also register or unregister to
receive notification of Visual
Concert VSX events.
vcbutton play
volume volume <set|up|down|get>
volume set <{0..50}>
Where:
• set: Sets the volume to a specified
level. Requires a volume setting
from {0..50}.
•up: Increases the audio volume by
1.
•down: Decreases the audio volume
by 1.
•get: Returns the current volume
level.
Changes the call audio volume
(not sound effects) on the VSX
system.
User interface screen location:
System > Admin Settings >
Audio (page 3): Master Audio
Volume
volume set 10
Command Syntax Description Example

Polycom VSX Series Specifications

General

Video Standards	H.264, H.263++
Audio Standards	G.711, G.722, G.722.1, G.728
Network Protocols	H.323, SIP
Video Inputs	S-Video, Composite video
Video Outputs	Composite, S-Video, DVI, HDMI
Audio Inputs	Line In
Audio Outputs	Line Out
Data Collaboration	H.239
Network Interfaces	Ethernet
Power Consumption	Varies depending on the specific model and configuration.