Polycom VSX Series

Chapter 3 - System Commands
© Polycom, Inc. 3 - 47
displayipisd-
ninfo
displayipisdninfo
<yes|no|both|ip-only|isdn-only|non
e|get>
Where:
• yes: Replies with both.
•no: Replies with none.
•both: Enables the display of both IP
and ISDN information.
•ip-only: Disables the display of IP
information.
•isdn-only: Enables the display of
ISDN information.
•none: Disables the display of IP and
ISDN information.
•get: Returns the current setting.
Displays IP and ISDN informa-
tion on the main user interface
screen
.
User interface screen location:
System > Admin Settings >
General Settings > Home
Screen Settings (page 2):
IP or ISDN Information
displayipisdninfo
yes
gener-
atetone
generatetone <on|off>
Where:
•on: Turns on the test tone.
•off: Turns off the test tone.
Turns the test tone on or off. The
tone is used to check the moni-
tor audio cable connections or to
monitor the volume level.
User interface screen location:
System > Diagnostics > Audio
> Speaker Test
generatetone on
getcallstate getcallstate Gets the state of current calls.
(To register the shell session to
receive notifications about call
state activities, see the
callstate command on
page 3-45.
User interface screen location:
System > Diagnostics > Call
Statistics
getcallstate
returns something like
cs: call[33]
speed[512]
dialstr[216.54.15
0.82]
state[connected]
cs: call[1]
inactive
cs: call[2]
inactive
Command Syntax Description Example