Polycom VVX 400 Series Training

Copyright 2019, Fuze
Utilizing Parking
Call parking is the ability to put calls on hold on
one phone and then be able to pick up that call
from another phone
• Press one of the available park line keys on the
phone
- The call will go into the selected parking lot
• Press the corresponding park line key to the
parked call
- The call will be connected through to the
phone
32
With visual parking, a user can see which lots are available. A red icon will appear on
the corresponding line key, if the parking lot is in use.
Non-visual parking is also available. With Non-visual parking, the user will not see
parking lots displayed as line keys.
To utilize Non-visual parking:
•Press the Transfer soft key, enter **70 to hear the parking lot number, wait for the
system to announce the lot number, and then press the Transfer soft key
•To retrieve a parked call, press the Pickup soft key, enter the digit of the parking lot
that the call is in, then hit the Enter soft key
OR
• Dial **7x, where x is the lot number, and then press the Dial/Send soft key
32

Polycom VVX 400 Series Specifications

General

Resolution	320 x 240 pixels
SIP Protocol Support	Yes
Line Keys	6
Lines	Up to 12
Speakerphone	Full-duplex
Opus Codec Support	No
Bluetooth Support	No
Wi-Fi Support	No
H.323 Support	No
PoE	Yes (802.3af)
Audio Features	Acoustic Clarity Technology
Supported Codecs	G.711, G.722, G.729
Power over Ethernet	IEEE 802.3af Class 2
Weight	0.90 kg
Headset Support	Yes (3.5mm or EHS)
Dimensions	24 x 18 x 15 cm