Polycom VVX410 - Phone Keys and Hardware

R38-410 v1.0 TelNet OfficeEdge Complete Reference Guide | 6 |
To set up/update Speed Dial 100 (2-digit codes)
From your phone
1) Dial 75, press # and listen for tone.
2) Enter the 2-digit code plus the 10-digit phone number you
would like assigned followed by #. (Recorded message
confirms code was programmed.)
From Personal Assistant Toolbar
1) Click Portal Auto-Login button on toolbar.
2) Select Outgoing Calls, then Speed Dial 100.
3) Click Add, then select 2-digit code from pull-down list.
4) Enter Description (optional) and 10-digit phone number
you would like assigned.
5) Click OK.
To place call using Speed Dial 100
From phone
1) Press # plus the 2-digit speed dial code, then press Dial.
From Personal Assistant Toolbar
1) Click on Speed Dial Directory icon.
2) Click on the number you wish to dial.
Quick Dial Guide
Quick Dial Guide
On
Off
Call Forward
All Calls
Forward or
72
Forward or
73
All Calls to Voicemail
21
#21
When Busy
90
91
Busy to Voicemail
40
#40
When No Answer
to Voicemail
41
#41
Not Reachable
(for business continuity plan
– requires set up)
94
95
Check Not Reachable Status
63
Call Waiting
43
#43
Cancel for single call
70
Call Return (last inbound number)
69
Directed Call Pickup (intercept)
97
Redial (last outbound number)
66
or Redial
Access Voicemail
86
or MESSAGE
Transfer Call
Transfer
Call Hold
Hold
Resume
Do Not Disturb
DND or
78
DND or
79
Three-way Call
Confrnc
(repeat to
add)
N-way Call (more than 3)
Confrnc
(repeat to
add)
Speakerphone
Speaker
(again for
off)
Mute
Mute
(again for
off)
Music On Hold Deactivation
(per-call deactivation)
60
Clear Message Waiting Indicator
99
Change Number of Rings before
voicemail picks up
610