17
TexJet® ECHO²
Fig.21: Rellable Cartridges cleaning process.
| 02_STEP
Remove the rubber valve with caution as there is a spring on the other
side. Remove the small ball and spring.
| 03_STEP
Clean the above parts and reassemble the cartridges.
Fig.22: Rellable Cartridges cleaning process.
NOTE: It is highly recommended to change cartridges annually, as
ink has dried at their bottom and that can lead to Damper and Head
Clogging.
Long Inactivity Maintenance
It should be performed if printer will remain idle for more than a month.
Use a fresh set of cartridges and load them with cleaning solution. Perform
two ink charges from the adjustment program (USB connection required).
To Next Page
Loading...
