Polyprint TexJet echo2 - Wake Up Procedure; Step-by-Step Wake Up Process

2
POLYPRINTDTG.COM
QUICK USER GUIDE
Wake Up Procedure
| 01_STEP
Power ON the TexJet® echo² printer.
| 02_STEP
If you are opening the printer for the rst time during the day, follow the
instructions on the Platen Control panel, to shake the ink cartridges.
Remove the cartridges. (If rellable cartridges are used and ink level is
low, rell them as described at rellable ink cartridge lling procedure,
page 5).
| 03_STEP
Gently shake the cartridges as displayed in the picture. (To check the
remaining ink on the sealed ink cartridges, check sealed ink cartridge
section at page 4).
| 04_STEP
Put the cartridge back at the
correct slot and close the
cartridge cover.
Fig.2: Ink cartridges shake procedure.
Fig.3: TexJet
®
echo² cartridge installation.