Polyprint S.A. Texjet+
Polyprint S.A – Texjet plus operation manual English V1.9
Light indications on the TexJet Plus
• Green HOME button led indication
o When ON you can press it to send tray inside
o When OFF the button is off
• STATUS led light indication
o When ON control panel is available
o When OFF device is switched off
o When FLASHING the printer is busy
o When blinking slowly the printer is in DEBUG mode. Printer is off
• C/P led light indication
o When ON many copies are in the spool
o When FLASHING FAST the 10sec after pressing the SWIFT button didn’t
exceeded
o When FLASHING SLOW the function 1 is enabled and there are no copies
o When OFF there is no function enabled and there are no copies
To Next Page
Loading...
