Polyprint S.A. Texjet+
Polyprint S.A – Texjet plus operation manual English V1.9
How to apply the different platens
To print on different sizes or areas it’s necessary to use different plates.
Consider that this plate is extra equipment. You need to order it.
T-Shirt Mini plate/Sleeve plate
The Mini plate includes the following items.
1 mini plate 32x28cm
1 adapter plate 42.5x7.5cm
2 short interface brackets
1 long interface bracket
8 countersunk hex 2,5mm screws
2,5mm Alen metric wrench tool
Then remove the long interface bracket by loosen the 2 hex screws and place instead the short
interface bracket.
To Next Page
Loading...
