Polyprint S.A. Texjet+
Polyprint S.A ā Texjet plus operation manual English V1.9
6 Month and 1 Year Maintenance:
Every 6 months:
The 6 month maintenance has to be performed to ensure good condition of the valves and
openings on the bulk ink cartridges.
Take out the ink and clean all the cartridges from the remaining ink.
Clean thoroughly all cartridges and valves from remaining and dried out ink. Exchange broken
parts and put back the ink in to the cartridges.
Every Year:
At least once in the year the ink in the bulk ink cartridges has to be refreshed completely. This is
to ensure good condition of the ink in the bulk ink cartridges.
Take out and clean all the cartridges from the remaining ink. You could keep running low the ink
levels in the cartridges to do this operation.
Clean thoroughly all cartridges and valves from remaining and dried out ink. Exchange broken
parts and put fresh ink in to the cartridges.
To Next Page
Loading...
