Polyprint S.A. Texjet+
Polyprint S.A – Texjet plus operation manual English V1.9
Carriage movement area and shaft:
To clean it, use a lint free paper and isopropyl alcohol. Clean the carriage movement shaft and all
the carriage area from dried out ink.
The Printhead shouldn’t remain longer than 15 minutes out of the capping
station since there is a danger to dry it out.
4. After having finished with the maintenance procedure, move the print head manually to
its parking position (far right position). Move the release knob to the opposite direction
the arrow indicates (clock-wise) until the print head can’t be moved any more (print head
lock position).
Make sure that the print head can’t move at all.
To Next Page
Loading...
