3-1
3 First Steps
3First Steps
3.1 Unpacking and Inspection
unpacking
The scope of supply consists of the following components:
•
Laser vibrometer PDV-100
•
Plug-in power supply PDV-AC
•
Carrier bag
•
Digital audio cable (Triax/RCA)
•
1 Allen key size 1.5mm
•
1 Sheet reflective film 3M Scotchlite Tape® (enclosed in the manual)
optional
•
VIB-A-P07 (mounting plate)
•
Carrier bag PDV-BS with integrated lithium ion battery PDV-LI
(rechargeable) and battery charger PDV-CH
•
Motor vehicle supply cable PDV-DC for the PDV being operated at a 12V
on-board plug socket or a motor vehicle cigarette lighter
•
VIB-A-T01 (tripod with 3-axes head)
•
VIB-A-T02 (tripod with fluid stage)
CAUTION!
Danger from dirt! Handle the front optics with care! Dirt may only be removed by using a
soft, dry cloth, an optics brush and bellows!
Inspection
Please pay attention to the following steps when unpacking:
1. Check the packaging for signs of unsuitable handling during transport.
2. After unpacking, check all components for external damage (scratches,
loose screws, damaged glass platesetc.).
3. In the case of wrong delivery, damage or missing parts, inform your local
Polytec representative immediately and give them the serial number of the
instrument. The identification label can be found on the underside of the
instrument and also on the inside cover of this manual.
4. Carefully retain the original packaging in case you have to return the
instrument.
5. Install the instrument as described in
SECTION
3.4 and execute a first
functional test as described in
SECTION
3.5.
To Next Page
Loading...
Need help?
General
