3-6
3 First Steps
Assembly
onto tripod
VIB-A-T01
To mount the PDV on the tripod VIB-A-T01, proceed as follows:
1. Assemble the tripod as described in the assembly instruction provided by
the manufacturer MANFROTTO.
2. Then mount the 3-axes head onto the tripod as described in the assembly
instructions provided by the manufacturer MANFROTTO.
3. Set the PDV onto the 3-axes head and fix it by using the central 1/4"
screw.
4. Whenever you want to remove the PDV from the 3-axes head, you should
hold the instrument while undoing the 1/ 4 " screw.
5. Keep the assembly instructions for the tripod and the 3-axes head in a
safe place.
Assembly
onto tripod
VIB-A-T02
To mount the PDV on the tripod VIB-A-T02, proceed as follows:
1. Assemble the tripod as described in the assembly instruction provided by
the manufacturer MANFROTTO.
2. Then mount the fluid stage onto the tripod as described in the assembly
instructions provided by the manufacturer MANFROTTO.
3. Open the locking mechanism on the fluid stage by simultaneously
pressing the safety latch and opening the safety lever.
4. Mount the hexagonal quick release plate provided on the underside of the
PDV using the 3 screw M5.
5. Use this plate to position the PDV on the fluid stage.
The safety lever clicks automatically into place.
6. Ensure that the quick release plate is attached all the way round. This
needs to be done, before the PDV is ready to use.
7. Whenever you want to remove the PDV from the fluid stage, you should
hold the instrument while opening the safety lever.
8. Keep the assembly instructions for the tripod and the fluid stage in a safe
place.
To Next Page
Loading...
Need help?
General
