After
the
inboard edge
of
the
panel
is
in position under
the
center
roof
rail, lower the outboard edge
of
the panel
into position, close the latch and lock the T-top.
NOTICE:
Do
not attempt to install the panels by sliding
them horizontally toward the center roof rail.
Doing
so
may cause the weatherstrips
to
be
aligned improperly, which may result
in
leaks
and possible damage to the weatherstrips.
NOTICE:
High pressure car washes may cause water to
enter your vehicle. Never
spray
water directly at
the
roof
panel joints. This will cause leaks.
2-66
To Next Page
Loading...
