2.
Then keep turning the pressure cap, but now push
down as you turn it. Remove the pressure cap.
3.
A
CAUTION:
You
can be burned if
you
spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Don't spill coolant on a hot engine.
4.
After the engine cools, open the coolant air
bleed valve.
There is one bleed valve. It
is
located on the
thermostat housing.
Fill the radiator with the proper
DEX-COOL@
coolant mixture,
up
to the base
of
the filler neck.
(See "Engine Coolant"
in
the Index for more
information about the proper coolant mixture.)
If
you see a stream
of
coolant coming from an air
bleed
valve,
close the valve. Otherwise, close the
valve after the radiator
is
filled.
5-22
To Next Page
Loading...
Need help?
General
