5.
Then fill the coolant recovery tank to
FULL
COLD.
6.
Put the cap back on the coolant recovery tank, but
leave
the radiator pressure cap
off.
I
7.
8.
Start the engine and let
it
run until you can feel the
upper radiator hose getting hot. Watch out for
the
engine cooling fans.
By
this
time, the coolant level inside the filler neck may
he
lower.
If
the level is lower, add more of the proper
DEX-COOL@
coolant
mixture
through the filler neck
until the level reaches the base of the filler neck.
r
9.
Then replace the pressure cap.
At
any time during
this procedure
if
coolant begins to
flow
out of the
filler neck, reinstall the pressure cap. Be sure the
arrows
on
the pressure cap line up like this.
To Next Page
Loading...
Need help?
General
