EasyManua.ls Logo

Pontiac 2003 Aztek - Removing the Sliding Rear Convenience Tray

Pontiac 2003 Aztek
453 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sliding
F-
ar
Convenience
'-ay
--
P
1
If
an- emovable convenience item isn't
secured properly, it can move around in a
collision
or
sudden stop. People in the vehicle
could be injured. Be sure
to secure any such
item properly.
Your vehicle may have a sliding rear convenience tray.
The sliding rear convenience tray can be pulled out
onto the tailgate making
it
easier to load or unload items.
To
use the tray:
1.
Push the release lever located
in
front of the handle
of the tray to release the pin from the floor
assembly.
2. Pull the tray toward you without lifting
it
up.
hear a click when the tray is locked into thc
extended position.
track
You will
?
The sliding rear convenience tray also has storage
areas in it. Pull up
on
the covers
to
open them. Be sure
to
close the covers once you are done loading or
unloading them.
The sliding rear convenience tray
has
a
maximum
weight capacity
of
400
Ibs. (181.6 kg) on
top.
Notice:
Your warranty does not cover parts or
components that fail because
of
overloading.
Removing the Sliding Rear
Convenience Tray
1.
Make sure that all items have been removed from
the top and the inside of the sliding rear
convenience tray.
rearward onto the tailgate until you hear a click.
2. Push down on the release lever and pull the tray fully
3.
Push the release lever again to roll the tray back
into the vehicle. You
will hear a click when the tray
is locked into position.
2-48

Table of Contents

Related product manuals