Playing a Compact Disc
With the ignition on, insert a disc partway into the
slot,
label side up. The player will pull it in and the disc
should begin playing.
If
you want
to
insert a CD when
the ignition is
off,
first press the eject symbol or push the
RCL knob.
If
you insert a CD with the radio off and
the ignition on, it will start
to
play.
When the disc is inserted, the CD symbol will be
displayed. If you select an
EQ setting for your CD, it will
be activated each time you play a CD.
As each new track starts
to
play, the track number will
appear on the display.
If an error appears on the display, see “Compact Disc
Messages’’ later in this section.
pb
1
(Forward): Press and hold this pushbutton
to
advance quickly within a track. You will hear sound at a
reduced volume. Release it
to
play the passage. The
display will show elapsed time.
RDM
3
(Random): Press this pushbutton
to
hear the
tracks in random, rather than sequential, order.
RDM and the track number
will
appear on the display.
4QQ
(Reverse): Press and hold this pushbutton
to
reverse quickly within a track. You will hear sound at
a reduced volume. Release it to play the passage.
The display will show elapsed time.
EQ
(Equalizer): Press
EQ
to
select the desired
customized equalization setting while playing a compact
disc. The equalization will be automatically set
whenever you play
a
compact disc. See “EQ” listed
previously for more information.
A
SEEK
v
:
Press the down arrow while playing a
CD to go
to
the start of the current track
if
more
than eight seconds have played. Press the up arrow
to
go
to
the next track.
If
you hold the button or press
it more than once, the player will continue moving
backward or forward through the disc.
A
SCAN
v
:
Press and hold one of the arrows for
more than two seconds until SCAN and the track
number appear on the display and you hear a beep.
The disc will go
to
the next track, play for a few seconds,
then go on
to
the next track. Press this button again
to
stop scanning.
RCL
(Recall): Push this button
to
see how long the
current track has been playing. To change the default on
the display (track and elapsed time), push the knob
until you see the display you want, then hold the knob
until the display flashes. The selected display will
now
be
the default. While elapsed time
is
showing,
CD
TIME will appear on the display.
BAND: Press this button
to
listen
to
the radio when
2
CD is playing. The inactive CD will remain safely
inside the radio for future listening.
3-72
To Next Page
Loading...
