The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Remote Driver Unlock Control
This feature allows you
to
customize the UNLOCK
button on the remote keyless entry transmitter.
Programmable Modes
Your vehicle can be programmed
to
one
of
the following
modes.
Mode
1:
Remote
All
Doors Unlock (When you
press
UNLOCK on your remote keyless entry transmitter,
all doors will unlock.)
Mode
2:
Remote Driver's Door Unlock Only (When you
press UNLOCK on your remote keyless entry
transmitter once, the driver's door will unlock. When you
press UNLOCK on your remote keyless entry
transmitter again within five seconds, all doors will
unlock.)
Before your vehicle was shipped from the factory,
it
was
programmed
in
Mode
2.
The mode
to
which the
vehicle has been programmed may have been changed
since it left the factory. To determine the mode
to
which your vehicle is programmed or
to
program your
vehicle to a different mode, do the following:
1.
Follow the instructions for
Entering Programming
Mode
on page
2-53.
2.
Press UNLOCK on the remote keyless entry
transmitter.
3.
Count the number of chimes you hear. The number
of chimes indicates the vehicle's current
programmed mode.
If
you do
not
wish
to
change
the current mode, you can either exit the
programming mode by following the instructions
later in this section or program the next feature
available on your vehicle.
4.
Press UNLOCK on the remote keyless entry
transmitter
to
change the current mode.
5.
Press UNLOCK on the remote keyless entry
transmitter until you hear the number of chimes
corresponding
to
the mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
UI
I
yuul
VeIIltile.
A".
.,*,
."
.*-L:-l-
2-57
To Next Page
Loading...
