Pontiac AZTEK 2003 User Manual

{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted won’t provide the
protection needed in a crash. The person
wearing the belt could be seriously injured.
After installing the seat, always check to be
sure that the safety belts are properly routed
and attached, and are not twisted.
Make sure the seatback is in the folded forward
position and the safety belts are on the correct section
of the seat.
Don’t put the sections of the bench seat in so they face
rearward because they won’t latch that way.
The split bench seat sections have seat position labels,
located on the back of each section, showing where
the section must go.
The seat must be placed in the proper location for the
legs to attach correctly.
1. Squeeze the angled latch release bar toward the
straight crossbar while placing the front hooks of
the bench seat onto the front two floor pins.
2. Make sure the bench
seat is angled so that
the front hooks
clear the floor pins.
If the front legs are
not attached correctly,
the rear legs will
not attach to the rear
set of floor pins.
1-9

Pontiac AZTEK 2003 Specifications

General

Brand	Pontiac
Model	AZTEK 2003
Category	Automobile
Language	English