Pontiac AZTEK 2003 User Manual

Hood Release
To open the hood, do the following:
1. Pull the hood release handle, located on the
driver’s side under the instrument panel.
2. Go to the front of the vehicle and slide the
secondary hood release from left to right.
3. Lift the hood.
4. If your vehicle has a prop rod, place it in the slot
on the underside of the hood.
Before closing the hood be sure all filler caps are on
properly, then let the hood down and close it firmly.
5-9

Pontiac AZTEK 2003 Specifications

General

Brand	Pontiac
Model	AZTEK 2003
Category	Automobile
Language	English