Replacement Bulbs
Lamp Bulb Number
Back-up Lamps (Bottom) 3155K
Headlamps High-beam 9005
Headlamps Low-beam 9006
Front Turn Signal/Parking/
Sidemarker Lamps
3057
Stop/Taillamps (Top) 3057K
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected at least
twice a year for wear or cracking. See “Wiper Blade
Check” under
Part B: Owner Checks and Services on
page 6-9
for more information.
Replacement blades come in different types and are
removed in different ways. For proper type and length,
see
Normal Maintenance Replacement Parts on
page 5-99
.
Here’s how to remove the wiper blades:
1. Turn the wipers on to the lowest intermittent setting.
2. Turn off the ignition while the wipers are at the
outer positions of the wipe pattern. The blades
are more accessible for removal/replacement while
in this position.
3. Pull the windshield wiper arm away from the
windshield or backglass.
4. While holding the wiper arm away from the glass,
push the release clip from under the blade.
5. Push the release clip, located at the connecting
point of the blade and the arm, in the up position.
Then, pull the blade assembly down toward
the glass to remove it from the wiper arm.
6. Push the new wiper blade securely on the wiper
arm until you hear the release clip “click” into
place.
5-49
To Next Page
Loading...
Need help?
General
