EasyManuals Logo

Posch SpaltFix S-360 User Manual

Posch SpaltFix S-360
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Wear protective gloves.
The working pressure of the hydraulic system must not exceed 230 bar.
Noise
The workplace-related, A-rated emission sound pressure level is
87 dB(A) when idling or
94 dB(A) when sawing,
measured at the operative's ear.
In the case of machines with a PTO drive, the noise level depends on the noise of the tractor.
Ear protection is therefore necessary.
The stated values are emissions values, and thus do not necessarily represent reliable
values for the work area. Although there is a correlation between emission and pollutant
levels, it is not possible to deduce reliably from that whether or not additional precautionary
measures are necessary. Factors that influence the level of pollutants present in the work
area include the individual nature of the work area, other sources of noise, e.g. the number
of machines and other work operations being carried out in the vicinity. Equally, permissible
values for a work area may vary between different countries. However, this information
should enable the user to estimate the dangers and risks more accurately.
Remaining risks
Even if all safety precautions are observed and the machine is used in accordance with the
instructions, some risks still remain:
Touching of revolving parts or tools.
Injury caused by flying logs or log pieces.
Risk of burns if the engine is not properly ventilated.
Hearing loss if ear protection is not worn when working.
Human error (e.g. due to excessive physical exertion, mental strain, etc.)
With every machine, some risks still remain. Therefore you should always be very careful
when working. It is up to the operating personnel to ensure that work is carried out safely.
Proper use
The SpaltFix S-360 is a cutting and splitting machine for logs with a diameter of 7 - 35 cm.
Using pre-split firewood can lead to a lower level of firewood quality and decreased
performance of the machine.
The machine splits logs with a splitting force of 12 t into 2, 4, 6 or 8 sections. The section
length is adjustable from 20 - 50 cm.
The machine may only be used to process firewood.
Incorrect use
Any incorrect use or use other than that specified under "Proper use" is expressly forbidden.
2.5
2.6
2.7
2.8
Safety information
10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Posch SpaltFix S-360 and is the answer not in the manual?

Posch SpaltFix S-360 Specifications

General IconGeneral
BrandPosch
ModelSpaltFix S-360
CategoryLog Splitter
LanguageEnglish

Related product manuals