Stickers and their meaning
1 Only operate with all guards and protective equipment in
place
Do not open or remove guards or protective equipment
while the machine is in operation
2 Caution, tool runs on
3 Only carry out repair, set-up, maintenance and cleaning
work when the drive is switched off and the tool is stationary.
4 Wear protective gloves
5 Wear safety shoes
6 Wear goggles and ear defenders
7 Caution, moving tools
8 Only one person may operate the machine at a time
9 Always read the user manual before operating the machine
Laser radiation – do not look into the beam!
Note the direction of rotation of the motor. The pump will be
damaged if rotation is in the wrong direction.
Caution, tool runs on
Lift here
Our hydraulic system is filled with:
Connection: Conveyor belt
Connection: Cross conveyors
Pressure measurement point
Rotational direction of motor
3.4
General
13
To Next Page
Loading...
Need help?
General
