Posch SpaltFix S-360 User Manual

Connecting the lifting device
1
3
4
2
1 Hydraulic connector 3 Dust cap - blue
2 Hydraulic sleeve 4 Dust cap - yellow
▪ Connect the hydraulic hoses of the lifting device to the machine.
– Connect the hydraulic connectors to the hydraulic sleeves. Ensure that colours
match; blue dust caps (flow) and yellow dust caps (return) go with one another.
If the transverse feeder is not connected, the dust caps must be put on the connectors and
sleeves to protect the latter from dust and dirt.
Operation - lifting device
1
2
1 Lifting device – up 2 Lifting device - down
▪ Lift the log with the control lever (lifting device - up).
11.4.2
11.4.3
Special equipment
54

Posch SpaltFix S-360 Specifications

General

Brand	Posch
Model	SpaltFix S-360
Category	Log Splitter
Language	English