7.10.2 Front seating group
Turn the driver's seat (Fig. 57,4) so that the backrest faces the driver's
door.
Turn the front passenger's seat (Fig. 57,5) so that the backrest faces the
front passenger's door.
Convert the table (Fig. 57,3) to a bed foundation (see Section 7.7).
Pull the seat cushion (Fig. 58,2) on the table.
Place the back cushion (Fig. 58,1) on the bench seat.
Slide the front passenger's seat (Fig. 58,5) as far as possible to the driver's
side.
Slide the driver's seat (Fig. 58,4) as near as possible to the front pas-
senger's seat.
Fig. 57 Prior to conversion
Fig. 58 After conversion
1 Back cushion
2 Seat cushion
3 Table
4 Driver's seat
5 Front passenger's seat