10.5.3 Operation (Waeco)
Operating modes The refrigerator is only operated with 12 V or 24 VDC.
Switching on:
Turn the temperature controller (Fig. 91,1) from position "0" to "1". The
appliance is switched on, the interior lighting is on. The green LED
(Fig. 91,2) lights up. If the red LED (Fig. 91,3) lights up, there is a fault (see
Chapter 14).
Switching off:
Set the temperature controller (Fig. 91,1) to "0".
Adjusting the temperature: Set the temperature with the temperature controller (Fig. 91,1).
z Position "1" = lowest cooling power
z Position "7" = highest cooling power
Fig. 91 Operating controls in the refrig-
erator
1 Temperature controller
2 Green LED: Operation
3 Red LED: Fault
Z When frozen food is kept in the freezer compartment, we recommend set-
ting the temperature controller to between "4" and "7". Temperatures of -18
°C or lower are then reached in the freezer compartment.
Z The temperature in the refrigerator depends on the ambient temperature
(location), how often the door is opened and how full it is. If necessary,
adjust the temperature controller.
Z Further information can be obtained in the manufacturer's instruction
manual.
To Next Page
Loading...
