8.5 Hose break guard (crash sensor)
The crash sensor (Fig. 69) protects against unwanted gas discharge. In the
event of an accident or a too high angle of the vehicle the gas supply will auto-
matically be interrupted.
If the crash sensor has been triggered, it has to be released manually.
Releasing:
Use a pen or similar implement (Fig. 69,2) to press the release knob
(Fig. 69,1) in for several seconds.
Z If the vehicle is equipped with a crash sensor, the living area heater may
be operated during the journey.
Z Additionally observe the manufacturer's instruction manual.
Fig. 69 Crash sensor
To Next Page
Loading...
