iQ200 User’s Manual Chapter 3: Operations and Settings
21
Table 3-1 LED Indicator Description
• If the indicator is on, the printer is ready and waiting for user input
• If only the [READY] indicator is blinking, then the printer is
paused and awaiting further instruction
• If the indicator is on, it means the printer is at a normal working
state
• If both the [READY] and [MEDIA] indicators are blinking, then
the printer detected media out
• If the indicator is on, it indicates the Wi-Fi is connected
• If the indicator is off, it indicates the Wi-Fi function is disabled
Panel Buttons
The three buttons on the front of the printer, please refer to Table 3-2 below for details regarding
their functionality.
Table 3-2 Panel Button Description
Advanced Functions
(Press and hold for 4 seconds)
• When printer is in working or
standby state, press once to
pause the printer
• When printer is in a paused
state, press once to resume
Self-test:
The printer performs a self-test and
prints out a configuration report
When printer is in a standby state,
press once and the printer would
feed one label
When printer is in an error state,
press once to clear the error report
Reset:
Resets the printer to Factory Default
Settings
To Next Page
Loading...
