PRK-5000 Operation Manual
- 29 -
[Items]
COUNT To select whether using the serial number or not.
[NO.] Setting of the serial number
Function display under ‘PRT’ will change from “---” to “RST”.
Under ‘MEA’ will change to “PRE”.
But “---” will be displayed again if the item changes.
Serial number will be “00001” if pressing the PRINT button.
Pressing AUTO or DISPLAY button renders the serial number to be
decreased or increased by “1”.
DATE Time and date
Function display under ‘PRT’ will change from “---” to “-1”.
Under ‘MEA’ will change to “+1”.
But “---” will be displayed again if the item changes.
Press AUTO button or DISPLAY button renders the selected part to be changed.
Press PRINT or MEASUREMENT button renders the selected part to be
decreased or increased by “1”.
2000 ~ 2099 : Year
01 ~ 12 : Month
01 ~ 31 : Day
00 ~ 23 : Hour
00 ~ 59 : Minutes
ORDER Order of displaying the date
BEEP ON: Enable BEEP sound in measurement mode.
OFF: Disable BEEP sound.
R-PRT Result of Refractometry to be printed out
ALL: Maximum of the 10 newest measurements and an average value for each eye.
AVE : Average values only
OFF: Not printed.
K-PRT Result of Keratometry to be printed out
ALL: Maximum of the 10 newest measurements and an average value for each eye.
AVE: Average values only
OFF: Not printed.
EYE ON: A sketch of eyeball and refraction diagram to the results of
refractometry are printed.
OFF: Not printed.
TRANS Setting RS232 communication speed and transfer format
Function display under ‘PRT’ will change from “---” to “PRV”.
Under ‘MEA’ will change to “NEX”.
But “---” will be displayed again if the item changes.
Press AUTO button or DISPLAY button renders the selected part to be changed.
Press PRINT button or MEASUREMENT button renders the value of
selected part to be changed.
Transfer format : PDR-7000, PAV-6100, PAV-6000, RT-5100, RT-2100,
VDR-2400, CANON-RK, COMPUTER
Baud Rate : 1200, 2400, 4800, 9600, 19200, 57600, 115200
(It is only possible to select the the ‘Baud Rate’ in COMPUTER mode.)
To Next Page
Loading...
