PRK-5000 Operation Manual
- 32 -
6.4.4 Messages for Internal Printer
Enter a message to be printed out with the results of measurement using the internal
printer in this window.
You can enter a messages in 24 characters × 2 lines.
[How to Change the Page]
Press MODE button to move the next page.
[Position Cursor]
The cursor blinking in the upper area represents the input position.
Press IOL button to change the row the blinking cursor.
[Character Cursor]
The selected characters by the pausing cursor will make a message.
Press the ILLUM button to change the row the character cursor.
And pressing AUTO or DISPLAY button yields the right and left change of the position
of the cursor.
[Input of Messages]
Press the MEASUREMENT button to add the selected characters in the position of the
blinking cursor.
To select the right character of input
To select the left character of input
To change the row of input character
To change the position of input
To quit and return to the Measurement Mode
To input selected character
To the next page
To delete the input character
To Next Page
Loading...
