PRK-5000 Operation Manual
- 31 -
[Items]
MODE Assigns order of Measurement Modes “REF, KER, K/R, CLBC” and delete
unnecessary modes.
1: First mode that is displayed when power is turned ON. It cannot
be set to “OFF”.
2~4: Second modes and after.
z Assign First Measurement Mode and after.
z If you want to delete unnecessary modes, delete from last(4
th
) one.
PRINT ORDER Order of printout
RIGHT/LEFT: Data of left eye will be printed after printing data of right
eye.
REF/KER: Result of keratometry will be printed after printing results
of refractometry for both eyes.
INIT AUTO START
OFF: Manual start after power ON
ON: Automatic start after power ON
AUTO START COUNT
3: Continuous measurement starts automatically and will
be performed 3 times.
5: Continuous measurement starts automatically and will
be performed 5 times.
To Next Page
Loading...
