Potterton Paramount three 95 - Page 56

Function Prog.
no.
Level
1)
Standard value
Summer/winter heating limit 1030 Eu 18°C
24-hour heating limit 1032 E 0 °C
Flow temp setpoint min 1040 E 8°C
Flow temp setpoint max 1041 E 80°C
Flow temp setpoint room stat 1042 E --- °C
Delayed heat request 1046 E 0 s
Room influence 1050 C - - - %
Room temp limitation 1060 E 0.5°C
Boost heating 1070 E --- °C
Quick setback
Off | Down to reduced setpoint | Down to frost prot setpoint
1080 E Down to reduced set-
point
Optimum start control max 1090 E 0 min
Optimum stop control max 1091 E 0 min
Reduced setp increase start 1100 E --- °C
Reduced setp increase end 1101 E -15°C
Overtemp prot pump circuit
Off | On
1120 E Off
Mixing valve boost 1130 E 5°C
Actuator running time 1134 E 120 s
Floor curing function
Off | Functional heating | Curing heating | Functional/curing heating |
Curing/Functional heating | Manually
1150 E Off
Floor curing setp manually 1151 E 25°C
Floor curing setp current 1155 E --- °C
Floor curing day current 1156 E 0
Excess heat draw
Off | Heating mode | Always
1161 E Heating mode
With prim contr/system pump
No | Yes
1172 E yes
Pump speed reduction
Operating level | Characteristic
1180 E Characteristic
Pump speed min 1182 C 30 %
Pump speed max 1183 C 80 %
Curve readj at 50% speed 1188 E 10 %
Flow setp readj speed ctrl
No | Yes
1190 E No
Operating level changeover
Frost protection | Reduced | Comfort
1198 E Reduced
Optg mode changeover
None | Protection | Reduced | Comfort | Automatic
1200 E Protection
Heating circuit 3
Parameter only visible, if heating circuit 3 exists!
Comfort setpoint 1310 Eu 20.0°C
Reduced setpoint 1312 Eu 18.0°C
Programming
56 Paramount three 30-115 kW 7308272-03 03.14