Trouble Shooting
Problem Cause Correct action
Cannot power on
Check fuse
Replace fuse
Other factors causing MPU
to malfunciton
After ignition
switch off, setting
information are lost
Change battery or fuse Reset information and save
Poor performance
of radio station
Weak signal
Screen show
overcurrent caution
Apple CarPlay
TM
/ Android
Auto
TM
will not start
Please pull out the USB and restart
the headunit
Replace the cable.
Device needs to be unlocked.
Device needs to be powered ON
for Apple CarPlay
TM
/ Android
Auto
TM
to function.
Allow it to charge and power on.
Unplug the device, close all Apps
and plug it in again.
Make sure the device is within
range.
Device’s Bluetooth connection
needs to be turned ON.
Go to Setting>GeneralSetting>BT
> BT Connection>Power ON.
Pair and connect the device like
new.
Once the USB current is
overload the maximum
limit, the headunit will
protect by itself.
Bad Lightning
TM
/USB
cable
Locked device
Not charged
CarPlay / Android Auto
frozen
Not connecting to the
device
Bluetooth is not connect-
ed
Press RST button on the panel by
penpoint, then, power on
Move the car to another place,
then try again
20
To Next Page
Loading...
