Battery Installation
Insert the batteries while observing the correct (+) and (-) polarities as illustrated below:
About the batteries
If the remote control unit fails to work even when it is operated near the set top box, please
replace the batteries.
Use size UM-4 (AAA) batteries.
Do not use rechargeable (Ni-Cd) batteries.
Do not attempt to recharge, short circuit, disassemble heat or throw the batteries into the fire.
Do not drop, step on or cause any impact to the remote control unit. This may damage it,
resulting in malfunction.
Do not mix old and new batteries.
If the remote control unit is not going to be used for a long time, remove the batteries.
Caution
Keep batteries out of children’s reach. If batteries are swallowed, contact a physician immediately.
To Next Page
Loading...