powersoft T Series - Page 44

INDEX
44
T-SERIES | SERVICE MANUAL
13. Resetting the IP Address via Front Panel Menu
Turn the Amplier On.
Press the Top Leftmost Button (YELLOW) to
9.1 NET CONFIG “AMP STATUS”
Press the Button (GREEN) to Select the IP Address Mode
(DYNAMIC IP or STATIC IP)
To Reset the IP Address, Press the Button (GREEN) to
“COMFIRM”
The Amplier will change & set the IP Address to
“DYNAMIC MODE”
Press the (YELLOW) to
9.1 NET CONFIG “DANTE STATUS”
Press the Button (GREEN) to Select the IP Address Mode
(DYNAMIC IP or STATIC IP)
To Reset the IP Address, Press the Button (GREEN) to
“COMFIRM”
The Amplier will change & set the IP Address to
“DYNAMIC MODE”