powersoft T Series Service Manual

T-SERIES | SERVICE MANUAL
INDEX
4. Service Precautions
4.1 Notes on SOLDERING
For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specications for the use with lead-free solders for repairs accompanied
by reworking of soldering.
Do NOT use a soldering iron whose tip temperature cannot be controlled.
4.2 Notes on REPLACING PARTS
About the AMP Module
The amplier module of this unit is able to correspond to repairing in the component manufacturer (Powersoft Company).
And it holds charge-free warranty period for 16 months after production.
4.3 Serial Number Labels
The details of the Serial Label is as follows.
On the DSP Board
4.4 MAC Address Labels
The details of the MAC Address Labels are as follows.
On the Rear of the Amplifier
Inside the Base of the Amplifier (under the Fan)On the Top Cover of the Amplier

powersoft T Series Specifications

General

Brand	powersoft
Model	T Series
Category	Amplifier
Language	English