powersoft X4 - X8 Specifications

37
X4 | SERVICE MANUAL
12. Updating of the Firmware using ArmoniaPlus v1.2
On the bottom of the Armonia Workspace panel, click on
“Match” & on the top panel, click on “Discovery” in order
to load the unit.
This procedure may take up to 5 seconds.
Once properly loaded, the Amplier and its Serial Number
should appear on the window.
By hovering the Mouse onto the unit, the following
information will be displayed.
EXAMPLE:
Model: X4 Dante
Serial: 00505285
Device Address: 169.254.7.192
Firmware: 1.8.6.160 (OLD VERSION)
Click on “System List”.
Check on the amplier required to Update Firmware.
Click on the “Update Selected”.
Upon clicking the “Update Selected”, the installation of
Firmware begins.
INDEX
After completed the updating, Armonia will show the
latest rmware of the Amplier.
Firmware: 1.8.7.15 (NEW VERSION)