INDEX
38
X4 | SERVICE MANUAL
13. Update the SD Recovery Card Rev. 1
1) Save on your computer the folder “Recovery Procedure” we had sent you by WeTransfer
2) Plug a micro SD card into you PC and format it in FAT32 and left it insert in your computer.
3) Install HDDRawCopy1.10Setup.exe (from folder Recovery Procedure/Recovery SD Card)
4) Open HDDRaw software. This window will be shown.
5) To select the Source, Double click on ”FILE” row
6) This window will be shown. Select the image File (different for X4 and X8) from the folder that you have saved on you
PC (Recovery Procedure/Recovery SD Card/FW/X4/SD-image-x4-1.8.6.128 (for X4 amplifier) or Recovery Procedure/Recovery
SD Card/FW/X8/SD-image-x8-1.8.6.128 (for X8 amplifier)) and click on open.
To Next Page
Loading...
