4.4.3 Frequency setting
Frequency setting (Note: Inside the broken-line is the flashing part.)
When under the output voltage setting press On▼ or when under battery capacity setting press
Off▲, it goes to the frequency setting. The frequency line flashes as in above picture. ①use button
Enter
to choose the different frequency. There are 2 different frequency---50,60HZ. ②press▲ or ▼
to exit the frequency setting (save the frequency setting) and goes to output voltage setting or battery
capacity setting.
CAUTION!
When powered by inverter, it is necessary to turn off the inverter
before setting voltage and frequency level.
4.4.4 Battery capacity setting
Battery capacity setting (Note: Inside the broken-line is the flashing pa
rt.)
When under the frequency setting press On▼ or when under battery quantity setting press
Off▲, it goes to the battery capacity setting. The battery capacity line flashes as in above picture. ①
use button Enter
to choose the different battery capacity. Battery capacity range is 1-200Ah. (Note:
long-press of Enter
can adjustment battery capacity quickly.) ②press▲ or ▼ to exit the battery
capacity setting (save the capacity setting) and goes to frequency setting or battery quantity setting.
To Next Page
Loading...