4.4.5 Battery quantity setting
Battery quantity setting (Note: Inside the broken-line is the flashing pa
rt.)
When under the battery capacity setting press On▼ or when under bypass voltage upper limit
setting press Off▲, it goes to the battery quantity setting. The battery quantity line flashes as in above
picture. ①use button Enter
to choose the different battery quantity. Battery quantity range is
32,34,36,38,40. ②press▲ or ▼ to exit the battery quantity setting (save the battery quantity setting)
and goes to battery capacity setting or bypass voltage upper limit setting.
4.4.6 Bypass voltage upper limit setting
Bypass voltage upper limit setting (Note: Inside the broken-line is the flashing pa
rt.)
When under the battery quantity setting press On▼ or when under bypass voltage lower
setting press Off▲, it goes to the bypass upper limit setting. The bypass upper limit line flashes as in
above picture. ①use button Enter
to set the different bypass voltage upper limit. The bypass
voltage upper limit range is 5%,10%,15%,25%(25% only for 220V output). ②press▲ or ▼ to exit the
bypass voltage upper limit setting (save the bypass voltage upper limit setting) and goes to battery
quantity setting or bypass voltage lower limit setting.
To Next Page
Loading...