PowerSync LFP-LV - 8-Bit Module Communication Settings; Rj485 Connector Diagram

5. 2. 8-BIT MODULE COMMUNICATION SETTINGS
TheLFPModuleswiththe8-Bittoggleswitchoptionisdesignedtohaveupto16modulesconnectedin
parallel.
NOTE: WITH THE 8-BIT LFP MODULES, DO NOT CONNECT MORE THAN 16 MODULES IN
PARALLEL. IF YOU ANTICIPATE NEEDING MORE THAN 16 MODULES IN PARALLEL, USE
ONLY THE 6-BIT LFP-LV MODULES.
TABLE 5. CAN COMMUNICATION INTERFACE DEFINITION
TABLE 6. RS485 COMMUNICATION INTERFACE DEFINITION
5. 3. RJ485 CONNECTOR DIAGRAM
Pin Species
1,2,7,8 NC
3,6 Ground
4 CAN-H
5 CAN-L
POWERSYNCPin Species
1,8 RS485-B
2,7 RS485+A
3,6 Ground
4,5 NC
www.powersyncenergy.com
(877)459-4591
©2022POWERSYNCEnergySolutions,LLC
22
01/10/23
LFP-LV Module Product Manual