VARIOUS INFORMAnON IN THE PROGRAM
[ 1
It comes tothe final voltage when the programended.
<4DEC
I
••
USB/Temp Select
USB Enabled
Ext Temp 26C
I
I
IN Power Voltage
12.56V
4 14 4 16 4 09
o
00 0 00 0 00
3-pin connector is selected to be the USB port.
The external temperature is displayed when the temperature probe is
used.
Present input voltage.
The battery is connected with each port through cable; you can check
voltage of each cell in the battery pack. When the cable is connected
with the ports on the rightof the charger, the program will display voltage
of up to 6 batteries. The battery pack needs an output connector
connected with each cell.
To Next Page
Loading...
Need help?
General
