8
4. LCD display
1) Automatic cycle interface
Display: PV voltage
, PV current, PV power, Battery voltage and Battery temperature
2) Clear the generated energy
Operation:
Step 1: Press the “SET” button and hold 5s under the PV power interface and the
value is flashing.
Step 2: Press the “SET” button to clear the generated energy
3) Switch the battery temperature unit
Press the “SET” button and hold 5s under the battery temperature interface.
4) Battery type
Battery type
Sealed Gel Flooded User
⑴
Set battery type by LCD
⑴
Operation:
Step1: Press the “SET” button and hold 5s under the battery voltage interface.
To Next Page
