PR POWER PR8000 - Emergency Stop Button and Earth Clamp

PR8000 9mt 4x2000W METAL HALIDE
18
TL116-11-00-03
01-04-2011
Items Description
18 Emergency stop button
19 Earth clamp connection
Connect the unit to the earth, through the clamp (19).
The unit must be connected to earth using a copper cable with a minimum cross-section of 6 mm².
PR POWER is not responsible for any damage caused as a result of failing to earth.
Make sure that the emergency stop button (18) is armed. If not, turn the grip handle in clockwise
direction. In an emergency it is possible to stop the generating set by pressing the stop button (18).
18
19